Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Authorized KICKER Dealer:
Purchase Date:
Serial Number:
PERFORMANCE
Model:
RMS Power
@ 14.4V, 4 stereo, 1% THD+N
@ 14.4V, 2 stereo, 1% THD+N
@ 14.4V, 4 mono, 1% THD+N
Length | in [cm]
Height | in [cm]
Width | in [cm]
Frequency Response ± 1dB
Signal-to-noise Ratio
Input Sensitivity
Electronic Crossover
Bass Boost
Pro Tip: To get the best performance from your new KICKER Amplifi er and extend the warranty by 1 year, use
genuine KICKER accessories and wiring.
INSTALLATION
Mounting: Choose a dry, structurally sound location to mount your KICKER amplifi er. Make sure there are no
items behind the area where the screws will be driven. Choose a location that allows at least 4" (10cm) of open
ventilation for the amplifi er. Drill four holes using a 7/64" (3mm) bit and use the supplied #8 screws to mount the
amplifi er.
2
2013 KXM Stereo Amp Rev G.indd 2
2013 KXM Stereo Amp Rev G.indd 2
KXM.2-SERIES AMPLIFIERS
OWNER'S MANUAL
MODEL:
KXM400.2
KXM400.2
100W x 2
200W x 2
400W x 1
9 9/16 [24.4]
2 3/16 [5.5]
8 5/16 [21]
10Hz–20kHz
>95dB, AU-weighted, @ rated power
Low Level: 125mV–5V
High Level: 250mV–10V
Off
Variable HP, 10-500Hz
Variable LP, 40-500Hz; 400Hz–5,000Hz with 10X Switch (BP capable)
Slope: 24dB/octave
0-18dB @ 40Hz
2/19/2013 3:03:19 PM
2/19/2013 3:03:19 PM
Tabla de contenido
