Non-Ducted Recirculation Filters - Best U102I Manual De Instrucciones

MAINTENANCE
Proper maintenance of the Range Hood will assure proper performance of the
unit.
Grease Filters
The grease filters should be cleaned when the LED Display flashes when
the blower is off (i.e. 30 hours of operation). Use a warm detergent
solution to clean filters. Filters are dishwasher safe. See page 12 for filter
removal and installation instructions.

Non-ducted Recirculation Filters

The non-ducted recircualtion filters should be changed when the LED
display flashes when the blower is off (i.e. 120 hours of operation). See
page 11 for filter removal and installation instructions.
Hood Cleaning
Stainless steel is one of the easiest materials to keep clean. Occasional care will
help preserve its fine appearance.
Cleaning tips:
1. Hot water with soap or detergent is all that is usually needed.
2. Follow all cleaning by rinsing with clear water. Wipe dry with a clean, soft cloth to
avoid water marks.
3. For discolorations or deposits that persist, use a non-scratching household cleanser
or stainless steel polishing powder with a little water and a soft cloth.
4. For stubborn cases, use a plastic scouring pad or soft bristle brush together with
cleanser and water. Rub lightly in direction of polishing lines or "grain" of the
stainless finish. Avoid using too much pressure which may mar the surface.
5. DO NOT allow deposits to remain for long periods of time.
6. DO NOT use ordinary steel wool or steel brushes. Small bits of steel may adhere
to the surface causing rust.
7. DO NOT allow salt solutions, disinfectants, bleaches, or cleaning compounds to
remain in contact with stainless steel for extended periods. Many of these com-
pounds contain chemicals which may be harmful. Rinse with water after expo-
sure and wipe dry with a clean cloth.
Painted surfaces should be cleaned with warm water and mild detergent only.
- 6 -