Repairs; Environmetal Protection; Technical Specifications - Metabo PowerAir V400 Manual De Instrucciones Original

Air tool is not supplied with suffi-
cient pressure.
• Pressure regulator not opened wide
enough.
– Open pressure regulator more.
• Hose connection between compres-
sor and air tool leaky.
– Check air hoses, replace defec-
tive parts if necessary.
Further work on the machine should
only be carried out by a qualified
electrician or the Service Centre in
your country.
7.

Repairs

A
Danger!
Repairs to electric tools must be carried
out by qualified electricians only!
9.

Technical Specifications

Suction capacity
Free air delivery (volume flow rate)
Filling rate
Max. operating pressure
Max. bearing-/ operating temperature *)
Min. bearing-/ operating temperature **)
Pressure vessel volume
No. of air outlets
No. of cylinders
Driving torque Cylinder head bolt
Motor speed
Motor capacity
Supply voltage (50 Hz)
Nominal current
Fuse protection min.
Degree of protection
Electric tools in need of repair can be
send to the service centre in your coun-
try. Refer to the spare parts list for the
address.
Please attach a description of the fault
to the power tool.
8.

Environmetal Protection

A
Danger!
The condensation water from the pres-
sure vessel contains oil residues. Dis-
pose of the condensation water in an
environmentally-oriented manner at
one of the appropriate collection points!
A
Danger!
Dispose of the waste oil from the com-
pressor pump in an environmentally-ori-
ented manner at one of the appropriate
collection points!
ENGLISH
The machine's packaging can be
100 % recycled.
Worn out machines and accessories
contain considerable amounts of valua-
ble raw and plastic materials, which can
be recycled.
These instructions are printed on paper
produced with elemental chlorine-free
bleaching process.
l/min
l/min
l/min
bar
° C
° C
l
Nm
-1
min
kW
V
A
A 16 (time-lag)
340
180
220
10
+ 40
+ 5
24
1
2
10
1450
2,2
230
10,8
IP 44
15