Maintenance; Parts List - Sagola MACK150 Manual De Instrucciones

It is considered that the unit and its accessories are totally
clean when the product sprayed through the gun, and
that circulating through the product return probe No. 3,
is clean thinner and free from the product previously
applied, meaning that the process must be repeated as
many times as necessary.
Once the unit and its accessories are clean, and as a prior
step before definitively stopping it, the Depressurisation
procedure described before in Section 10 of the Manual
must be applied.
Clean the Suction Probe filters or the product cup and those
of the spray gun.
Remove any remains of product from the gun, hoses and the
rest of the unit with a cloth soaked in thinner.
Keep gasket areas free of accretions and foreign bodies.
The air cap is a precision component. Any deformation,
especially in the product outlet orifices, may cause malfunctions
in its operation and incorrect or deficient quality spraying.
If necessary, dip the air cap in thinner in order to soften the
Before starting to work, verify the state of the product hoses
and the connections of the elements through which the
product flows.
CHECK AND FILL EVERY DAY WITH THE LUBRICANT
SAGOLA 30090098, IF NECESSARY, THE EXISTING
ACCOMMODATION IN THE GLAND (9). REPLACE IF
DIRTY OR DAMAGED.
In order to carry out maintenance or repairs, first disconnect
the unit from the compressed air distribution network.
Never move the unit by tugging on the hoses.
Always place the unit at a distance of least 6 metres away
from where the product is to be applied.
page 11
remains of product or dirt. Once softened, blow the cap with
compressed air until any remains of product and thinner are
eliminated.
For automatic cleaning of the gun, tools and accessories used
in the mixing and preparation of the product to be applied, we
recommend the use of SAGOLA Washing Machines.
IMPORTANT
The gun can be cleaned with thinners or detergents in a
gun washing machine.
If you opt for this cleaning system, we advise you to remember
the following considerations, which, if not applied, may damage
the gun and render the warranty null and void.
- Do not submerge the gun in solvent or detergents longer
than the time required for cleaning.
- Do not use the gun immediately after cleaning has been
completed.
- Ensure that there is no thinner or detergent inside and that
it is completely free of these. Other cleaning systems can be
used (ultrasound).

14. MAINTENANCE

Do not apply excessive force or inadequate tools for
maintaining and cleaning the unit. Some repairs must be
done with special tools on some occasions. In these cases,
you must contact the Customer Service of SAGOLA. Any
handling of this product by non-authorised personnel would
render the warranty null and void.
The unit must be overhauled on a periodic basis to check
the status of its components and replace these when they
are not in perfect condition.
IN ORDER TO OBTAIN THE BEST POSSIBLE RESULTS,
ALWAYS USE ORIGINAL SAGOLA SPARES THAT
GUARANTEE TOTAL INTERCHANGEABILITY, SAFETY
AND PERFECT OPERATION.

15. PARTS LIST

page 12
- 20 -
page 13