Tabla de contenido
Idiomas disponibles
Idiomas disponibles
•
After the device has cooled down, wipe the baking surfaces
off with a paper towel.
Electrical connection
•
Insert the plug in a duly installed 230 V/50 Hz protective
contact socket. The red mains control lamp lights up.
Using the unit
NOTE:
•
Keep the baking surfaces closed while heating.
•
Once the heating-up phase is over, the green control lamp
lights up.
•
The red control lamp remains on to show that the device is
working.
•
Release the lid catch and fold the lid up until it remains
open.
•
Insert one double sandwich in each slot as required.
•
Gently close the cover. Close the lid catch.
NOTE:
•
The green control lamp switches on and off during
baking in order to maintain the baking temperature.
•
The baking time depends on your individual taste.
The longer the sandwiches remain in the device, the
greater the level of browning.
•
The baking section should always be closed in the
intervals between baking.
•
Open the lid catch carefully and then fold up the lid.
•
Remove the toasted sandwiches with a wooden fork or
similar item.
•
Lightly grease the baking surfaces again as required after
each baking process.
CAUTION:
Do not use pointed or sharp objects to avoid damaging the
coating of the baking surfaces.
Switching Off
If you would like to interrupt operation or switch the device off,
remove the plug from the socket. The red control lamp goes off.
Cleaning & maintenance
WARNING:
Always pull out the plug from the mains socket before cleaning
and wait until the unit has cooled down.
CAUTION:
•
Do not use any wire brush or other abrasive objects.
•
Do not use any acidic or abrasive detergents.
•
Under no circumstances should the device be immersed
in water for cleaning.
16
05-ST 585 CB.indd 16
05-ST 585 CB.indd 16
Baking Surfaces
•
Please remove any food residues while they are still warm
with a damp cloth or paper towel.
•
Wash off the baking surfaces with a soft sponge and soapy
water; then wipe with clean water and dry thoroughly with a
soft cloth. After drying please apply a thin fi lm of edible oil to
the surface.
Housing
Clean the housing after use with a slightly damp cloth.
Technical Data
Model: ...........................................................................ST 585 CB
Power supply: ............................................................230 V, 50 Hz
Power consumption: ..........................................................1400 W
Protection class: ........................................................................... Ι
Net weight: ..........................................................................2.9 kg
This device has been tested according to all relevant current
CE guidelines, such as electromagnetic compatibility and low
voltage directives, and has been constructed in accordance with
the latest safety regulations.
Subject to technical changes without prior notice!
Meaning of the "Dustbin" Symbol
Protect our environment: do not dispose of electrical equipment
in the domestic waste.
Please return any electrical equipment that you will no longer
use to the collection points provided for their disposal.
This helps avoid the potential effects of incorrect disposal on the
environment and human health.
This will contribute to the recycling and other forms of reutilisa-
tion of electrical and electronic equipment.
Information concerning where the equipment can be disposed of
can be obtained from your local authority.
13.08.2009 9:25:10 Uhr
13.08.2009 9:25:10 Uhr
Tabla de contenido
