Sunbeam 3046 Manual De Instrucciones página 8

C
ARING FOR
T O
URNING FF
1. Turn the Steam Lever to
2. Unplug the iron from the power source.
WARNING: NEVER yank the power cord when unplugging the iron.
This can damage the cord.
S Y
TORING OUR
1. Allow the iron to cool.
2. If you do not use your iron on a daily basis, empty the water reservoir after each use
for a longer iron life. To do so, unplug the iron, turn the iron upside down, open the
fill hole cover, and allow water to flow from the fill hole. Shake the iron gently
to remove trapped water drops.
3. Loosely loop the power cord around the heel rest and store the iron on its heel rest.
I : Wrapping the cord around the iron too tightly can damage the cord.
MPORTANT
T : When not ironing, always set the Steam Lever to
IP
Dial to Off.
M
AINTAINING
C
LEANING THE
Clean the soleplate if starch or other residue accumulate.
To clean the Soleplate:
1. Allow the iron to cool and then wipe it with a soft, damp cloth.
WARNING: DO NOT use abrasive cleansers, scouring pads or vinegar to clean
the soleplate. This will damage the finish.
2. Run the iron over an all-cotton cloth to remove any residue.
Y
Y I
OUR RON
O
/Off (Dry) and Fabric Select Dial to Off.
I
RON
S
OLEPLATE
I
OUR RON
Y S
OUR UNBEAM
A
FTER
O /Off (Dry) and the Fabric Select
U
SE
®
I
RON