Lubricating The Gearbox - Stihl HS 82 Manual De Instrucciones

English
WARNING
To reduce the risk of fire and burn injury,
use only spark plugs authorized by
STIHL. Always press spark plug boot (1)
snugly onto spark plug terminal (2) of the
proper size. (Note: If terminal has
detachable SAE adapter nut, it must be
securely attached.) A loose connection
between spark plug boot and ignition
wire connector in the boot may create
arcing that could ignite combustible
fumes and cause a fire.
Installing the spark plug
Fit the spark plug by hand and
N
screw it in
Tighten spark plug with combination
N
wrench
Press the spark plug boot firmly
N
onto the spark plug
22

Lubricating the Gearbox

1
Use STIHL gear lubricant for hedge
trimmers (special accessory) to lubricate
the blade drive gear.
2
After about 25 hours of operation:
Remove the screw plug (1) from the N
gear housing on the underside of
the unit.
Screw the tube of grease (2) into the
N
filler hole.
Squeeze up to 1/4 oz (5 g) grease
N
into the gearbox.
NOTICE
Do not completely fill the gearbox with
grease.
Remove the tube of grease (2).
N
Refit the filler plug and tighten it
N
down firmly.
HS 82 R, HS 82 T