Carton Contents - Sun joe SPX1050 Manual Del Usuario

Unpacking

Carton Contents

• Electric pressure washer
• Top handle
• Rear bracket
• ST4.8x16 thread forming screw
• ST3.5x16 thread forming screws (x2)
• Spray wand
• Trigger gun
• Foam cannon
• High-pressure hose
• Garden hose adapter (female coupler)
• Quick-Connect nozzles (0º, 25º & 40º)
• Needle clean-out tool (included with manual packet)
• Manual with registration card
1. Carefully remove the electric pressure washer and check
to see that all of the above items are supplied.
2. Inspect the product carefully to make sure no breakage or
damage occurred during shipping. If you find damaged or
missing parts, DO NOT return the unit to the store. Please
call the Snow Joe + Sun Joe
®
1-866-SNOWJOE (1-866-766-9563).
NOTE: Do not discard the shipping carton and packaging
material until you are ready to use the pressure washer.
The packaging is made of recyclable materials. Properly
dispose of these materials in accordance with local
regulations or save the packaging for long-term product
storage.
IMPORTANT! The equipment and packaging material are not
toys. Do not let children play with plastic bags, foils, or small
parts. These items can be swallowed and pose a suffocation
risk!
m
WARNING!
Do not connect to power supply until
assembly is complete. Failure to comply could result in
accidental starting and possible serious personal injury.
Assembly
Tools required: Phillips head screwdriver
1. Slide the top handle into the top of the pressure washer,
and attach it using the larger ST4.8x16 thread forming
screw (Fig. 1).
2. Attach the rear bracket to the back of the pressure washer
with the two smaller ST3.5x16 thread forming screws
(Fig. 1).
customer service center at
®
ST4.8x16
3. To connect the spray wand to the trigger gun, insert the
locking lugs on the spray wand into the end of the trigger
gun. Twist clockwise to lock them together (Fig. 2).
Fig. 2
Locking lugs
Spray wand
4. Connect the high-pressure hose to the trigger gun. Push
until the hose snaps into place (Fig. 3). To release the
high-pressure hose from the trigger gun, press the release
button and pull the hose out.
Fig. 3
5. Connect the other end of high-pressure hose to the water
outlet on the pressure washer. Push until the hose snaps
into place (Fig. 4). To release the high-pressure hose from
the pressure washer, push the release switch and pull the
hose out.
6
Fig. 1
Handle
Rear
bracket
ST3.5x16
Trigger
gun
Trigger gun
Release button
High-pressure hose