1.
IMPORTANT SAfETY INSTRUCTIONS
•
Keep the inverter well ventilated in order to properly dis-
perse heat generated while it is in use. Make sure there are
several inches of clearance around the top and sides and
do not block the slots of the inverter.
•
Make sure the inverter is not close to any potential source
of flammable fumes, gases or clothing.
•
Do not place the inverter in areas such as battery compart-
ments or engine compartments where fumes or gases may
accumulate.
•
Keep the inverter dry.
•
DO NOT allow the inverter to come into contact with rain or
moisture.
•
DO NOT operate the inverter if you, the inverter, the device
being operated or any other surfaces that may come into
contact with any power source are wet. Water and many
other liquids can conduct electricity, which may lead to seri-
ous injury or death.
•
Do not place the inverter on or near heating vents, radiators
or other sources of heat or flammable materials.
•
Do not place the inverter in direct sunlight. The ideal air
temperature for operation is between 50° and 80°F.
•
Only connect the power inverter to a 12-volt accessory
outlet or 12-volt airplane power outlet. Do not attempt to
connect the inverter to any other power source, including an
AC power source. Connecting to a 6-volt or 16-volt battery
will cause damage to the inverter.
•
Make sure the AC plug and/or USB connection is tight.
•
Do not modify the AC or USB receptacle in any way.
•
Do not try extending or otherwise changing the 12-volt
power cord attached to your inverter.
All manuals and user guides at all-guides.com
SAVE THESE INSTRUCTIONS
• 5 •