Set Printer Ip Address Screen Is Displayed - Canon PIXMA PRO-1 Serie Solucion De Problemas De Configuracion De Red

Ocultar thumbs Ver también para PIXMA PRO-1 Serie:
Tabla de contenido
Idiomas disponibles

Idiomas disponibles

2
When the Connect Cable screen appears, connect the printer to the computer with
a USB cable.
For Macintosh, click Next.
When the Set Printer IP Address screen appears, check the IP address settings by referring
to Check 4 and onward in "Set Printer IP Address Screen is Displayed" on page 4.
3
When the Disconnect Cable screen appears, remove the USB cable, then click
Next.
The wired connection setup of the printer is now complete. Click Complete or OK.
Proceed with the setup by following the procedures from "Information" (Windows) or "Registration
(Macintosh)" (Macintosh) in the printed manual: Getting Started.
Glossary
DHCP function
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
IP address
A numerical identification assigned to each computer or network device connected to a network.

Set Printer IP Address Screen is Displayed

Check
A
Check 1
Make sure that you follow "Connection Checklist" on page 7, then click Connect (A).

B
A
Check 2
Turn off the network device (router, etc.), turn it back on, then click Connect (A).
Check 3
Make sure that the DHCP function of the network device (router, etc.) is active.
To specify the IP address, refer to
and onward in "Specifying the Printer's IP Address" on
page 5.
For details on how to check settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
Activate the DHCP function of the network device, then click Connect (A).
For details on how to change settings of the network device, refer to the manual supplied with the
network device or contact its manufacturer.
Check 4
In Windows, make sure that Get IP address automatically is selected, then click
Connect (A).
In Macintosh, make sure that Get IP address automatically is selected for TCP/IP
Setting (B) in the Set Printer IP Address screen, then click Connect (A).
Check 5
If the problem is not solved, specify the IP address.
For details on how to specify the IP address, refer to
Address" on page 5.
Glossary
DHCP function
A function to automatically assign required information (IP address, etc.) to computers, printers or other
devices connected to the network.
IP address
A numerical identification assigned to each computer or network device connected to a network.
and onward in "Specifying the Printer's IP

Capítulos

Tabla de contenido
loading

Tabla de contenido