Tabla de contenido
Idiomas disponibles
Idiomas disponibles
STEP 2 - ELECTRICAL CONNECTIONS
There are three ways to connect Uplift Tech depending on your cabinet's electrical option.
1. Allow 24" (610mm) of electric wire. Feed electric wire into opening on top of cabinet as shown.
2. Robern recommends the Maestro® C•L® Dimmer from LUTRON®, Model # MACL-153M.
http://www.lutron.com/TechnicalDocumentLibrary/369613a.pdf
Other LED control dimmers may operate with this product but have not been tested or verified. It's recommended that the dimmer be
within reach of your mirror so you can adjust the brightness.
For on/off (no dimmer) operation a standard wall switch may be substituted in place of the dimmer.
Connection for E2 and E4 - No Door Light
Connection for E2 and E4 - With Door Light and Programmable Night Light
© 2019 Robern, Inc. 701 N. Wilson Ave. Bristol, PA 19007 U.S.A.
800.877.2376
www.robern.com
Installation instructions
Circuit Breaker
120 VAC
20A GFI
Circuit Breaker
Black (L)
120 VAC
White (N)
20A GFI
Green (G)
Field Connection
Black (L)
White (N)
Green (G)
Field Connection
Black (L)
Wall-mounted
Dimmer/switch
10
Cabinet Power Circuit
Black (L)
Black (L)
White (N)
White (N)
Ground (G)
Red (L)
Black (L)
Circuit
White (N)
White (N)
Black (L)
Black (L)
White (N)
White (N)
Ground (G)
Part no. 209-1311-rA rev. 06/13/19
Uplift Tech Cabinet
Door
Light
Cabinet
Power
Circuit
Tabla de contenido
