Remote Control Unit - Technibel PORTABLE SCDf32C5I Instrucciones De Uso

REmOTE CONTROL UNIT

DISPLAY
Information is displayed when the remote controller is switched
on. If switched off, only the operating mode, the room temperature
and the clock are shown
Operation mode
Automatic
Cooling
Dehumidification
Fan
Night
mode
mODE SELECTOR BUTTON
Press this button to modify the air
conditioner mode.
(cooling)
(automatic)
The air conditioner makes the room
cooler.
(dry)
The air conditioner reduces the humidity
in the room.
(fan)
The air conditioner works only as a
circulation fan.
TEmPERATURE SETTING BUTTONS
- (cooler)
Press this button to decrease the set
temperature.
+ (warmer)
Press this button to increase the set
temperature.
"fAN " BUTTON (fan speed)
Fan speed is automatically
s e l e c t e d b y
microcomputer.
High speed.
Medium speed.
Low speed.
NIGHT/ECO BUTTON
Press this button in order to select the
NIGHT/ECO mode.
"HIGH POWER" BUTTON
Press this button in order to select the
HIGH POWER mode.
CLOK AND TImER SETTING BUTTON
Press this button in order to:
• set the clock
• set the ON/OFF timer
For details refer to paragraphs "SETTING
THE HOUR" and "SETTING THE TIMER".
C
fan speed
HIGH POWER
mode
Automatic
High speed
SENSOR
A t e m p e r a t u r e
sensor inside the
remote control unit
detects the room
temperature.
t h e
HOURS AND mINUTES SETTING
BUTTONS
With these buttons is possible to set the
clock and the timer. For details refer to
paragraphs " SETTING THE HOUR" and
"SETTING THE TIMER".
I FEEL mode is active
(remote controller
sensor active)
Displayed when
transmitting data
Inverter model
Timer modes
Clock
Medium speed
Low speed
TRANSmITTER
When you press
the buttons of the
remote control unit,
the mark
a p p e a r s o n t h e
display to transmit
the setting changes
to the receiver in the
air conditioner.
C
7
Room
temperature
Set point
temperature
NOT AvAILABLE OPERATION mODE
ON/Off BUTTON
This button turns the air conditioner ON
and OFF.
INACTIvE BUTTON
IfEEL/IfEEL C SENSOR SELECTOR
Press this button to modify the active
setting for room temperature detection
(from remote controller to air conditioner
and viceversa).
INACTIvE BUTTONS
TImER SELECTION BUTTON
Press this button to select the type of
timer to activate. For details refer to
paragraph "SETTING THE TIMER".
EN