Maintenance And Repairs; Disposal - Stihl HSE 61 Manual De Instrucciones

14 Maintenance and Repairs

HSE 71
600 mm blade:
Left handle:
Right handle:
HSE 71
700 mm blade:
Left handle:
Right handle:
HSE 81
500 mm blade:
Left handle:
Right handle:
HSE 81
600 mm blade:
Left handle:
Right handle:
HSE 81
700 mm blade:
Left handle:
Right handle:
The K‑factor in accordance with Directive
2006/42/EC is 2.0 dB(A) for the sound pressure
level and sound power level; the K‑factor in
accordance with Directive 2006/42/EC is
2
2.0 m/s for the vibration level.
The vibration values quoted above have been
measured according to a standardized test pro‐
cedure and may be used to compare electric
power tools.
Depending on the type of usage, the vibrations
that actually occur may differ from the values
quoted.
The vibration values quoted may be used for an
initial assessment of the user's exposure to
vibrations.
The actual exposure to vibrations has to be eval‐
uated. This process may also take into account
times during which the electric power tool is
switched off and times during which it is switched
on but running without load.
Observe measures to reduce vibration exposure
to protect the user – see section on "Vibrations"
in chapter on "Safety Precautions and Working
Techniques".
13.5 REACH
REACH is an EC regulation and stands for the
Registration, Evaluation, Authorisation and
Restriction of Chemical substances.
0458-279-9921-E
For information on compliance with the REACH
regulation (EC) No. 1907/2006 see
2
3.8 m/s
www.stihl.com/reach.
2
2.6 m/s
14 Maintenance and Repairs
Users of this machine may only carry out the
2
3.8 m/s
maintenance and service work described in this
2
2.6 m/s
user manual. All other repairs must be carried
out by a servicing dealer.
STIHL recommends that you have servicing and
2
3.2 m/s
repair work carried out exclusively by an author‐
2
2.1 m/s
ized STIHL servicing dealer. STIHL dealers are
regularly given the opportunity to attend training
courses and are supplied with the necessary
2
3.5 m/s
technical information.
2
2.5 m/s
When repairing the machine, only use replace‐
ment parts which have been approved by STIHL
for this power tool or are technically identical.
2
3.5 m/s
Only use high-quality replacement parts in order
2
2.5 m/s
to avoid the risk of accidents and damage to the
machine.
STIHL recommends the use of original STIHL
replacement parts.
Original STIHL parts can be identified by the
STIHL part number, the { logo and the
STIHL parts symbol K (the symbol may appear
alone on small parts).

15 Disposal

Observe all country-specific waste disposal rules
and regulations.
STIHL products must not be thrown in the gar‐
bage can. Take the product, accessories and
packaging to an approved disposal site for envi‐
ronment-friendly recycling.
Contact your STIHL servicing dealer for the lat‐
est information on waste disposal.
English
31