Bang & Olufsen BeoSound 2 Manual Del Usuario página 7

Keypad functions
Play Press GO to start playback.
Pause To stop playback, press GO a second time.
∧ and ∨ adjusts volume.
Volume
Next track Press
Previous track Press
step to the previous track in a folder.
Random on/off To play tracks in random order, press and hold
simultaneously for two seconds. Repeat to restore
▼
sequential playback.
Next folder Press
Previous folder Press
Cue To cue through your tracks, press and hold
Lock/Unlock To lock or unlock the keypad, press and hold
simultaneously for two seconds.
Standby To switch BeoSound 2 to standby, press and hold GO
for two seconds.
BeoSound 2 switches to standby after 30 seconds in
pause mode.
BeoSound 2 – Switch between playback and download mode.
on the base: Press GO to start playback, or press and hold GO for
2 seconds to connect to the PC – enabling you to
download to BeoSound 2. The base light changes
colour accordingly, as described below.
*Cueing is not possible using the WMA format.
Audible feedback
BeoSound 2 beeps to inform you
about its current state. The following
situations are accompanied by a
particular pattern of beeps:
– Player switched on
– Player switched to standby
– Random on
– Random off
– Keypad locked
– Keypad unlocked
– Battery power low (beep repeated
every 30 seconds)
– Error (beep repeated every
5 seconds)
– Software update completed
All manuals and user guides at all-guides.com
to step to the next track in a folder.
▲
to restart the current track. Press
▼
to step to the next folder.
to step to the previous folder.
Base light feedback
When BeoSound 2 is placed on the
base, the base lights up to indicate
it's current status:
Green... Track playback or pause, not
connected to the PC
Red... Download mode, connected
to the PC
Orange... Resetting – continuous
orange light feedback indicates
error
Flashing light (red or green)...
Battery charging
Flashing red and green, followed by
orange, then red... Updating
software
twice to
▼
and
▲
or *.
and