Bosch Professional GAS 35 L AFC Manual Original página 18

18 | English
(10) Top part of dust extractor
(11) Catch for top part of dust extractor
(12) Wheel
(13) Castor brake
(14) Castor
(15) Cable holder
(16) Closing flap for filter cover
(17) Holder for suction tubes
(18) Holder for crevice nozzle/curved nozzle
(19) Holder for floor nozzle
(20) Dust extraction adapter
(21) Vacuum hose
(22) Curved nozzle
(23) Disposal bag
(24) Flat-pleated filter
(25) Crevice nozzle
(26) Rubber lip
(27) Brush inserts
(28) Floor nozzle
(29) Suction tube
(30) Adapter for vacuum hose holder
(31) Snap fastener
(32) False air intake
(33) Control LED
(34) Filter cover
(35) Fill level sensors
Technical data
Wet/dry dust extractor
Article number
Rated voltage
Rated power input
Frequency
Container volume (gross)
Net volume (liquid)
Dust bag volume
A)
Max. vacuum
– Dust extractor
– Turbine
A)
Max. flow rate
– Dust extractor
– Turbine
Max. suction power
Area of pleated filter
1 609 92A 73J | (12.11.2021)
Wet/dry dust extractor
Dust class
Weight according to EPTA-Pro-
cedure 01:2014
Protection class
Protection rating
A) Measured using a vacuum hose 3 m long and 35 mm in diameter
The specifications apply to a rated voltage [U] of 230 V. These spe-
cifications may vary at different voltages and in country-specific mod-
els.
Automatic start/stop
Rated voltage
230 V
Permitted connected load of the connected power tool.
These values can differ for other country-specific models. Please take
note of the information on the socket of the dust extractor.
Noise/Vibration Information
Noise emission values determined according to
EN 60335-2-69.
Typically the A-weighted sound pressure level of the dust ex-
tractor is 70 dB(A). Uncertainty K = 3 dB. The noise level
when working can exceed 80 dB(A).
Wear hearing protection
Total vibration values a
determined according to EN 60335-2-69: a
K = 1.5 m/s
Assembly
Pull the plug out of the socket before cleaning or per-
u
forming maintenance on the vacuum cleaner, making
tool adjustments, changing accessories or putting
away the vacuum cleaner. This safety measure prevents
GAS 35 L AFC
the vacuum cleaner from being started accidentally.
3 601 JC3 2..
Fitting the holder for the vacuum hose (see
V 220–240
figure A)
W 1200
– Slide the holder (5) for the vacuum hose firmly into the
Hz 50–60
corresponding adapters (30) from above until they click
l 35
into place.
l 19
Fitting the Vacuum Hose (see figure B)
l 19
– Attach the vacuum hose (21) to the hose adapter (2) and
turn it clockwise as far as it will go.
kPa 23
Note: The friction generated by the dust in the vacuum hose
kPa 25.4
and accessory during extraction causes an electrostatic
charge that the user may experience as static discharge (de-
l/s 36 pending on environmental factors and their physiological
state).
3
m /s 0.036
Bosch generally recommends using an anti-static vacuum
l/s 74
hose (accessory) to vacuum up fine dust and dry materials.
3
m /s 0.074
W 1380
2
m 0.615
kg
Maximum power Minimum power
2200 W 100 W
(triax vector sum) and uncertainty K
h
h
2
.
GAS 35 L AFC
L
12.2
/I
IPX4
2 <2.5 m/s ,
Bosch Power Tools