Polar GH266 Manual De Instrucciones página 5

Fit Glass Panels
1. Screw the collars to the rim of the appliance.
Note: Ensure the hole in the
collar for the grub screw faces
inwards.
2. Slot the two side panels into the collars, with
the holes in the glass at the top.
Note: Ensure the screw hole
furthest from the edge of the
panel goes to the back of the
appliance.
3. Screw a grub screw into each collar to secure
the panels.
Note: Ensure the soft end of the
grub screw is the end making
contact with the glass.
Do not overtighten the grub
screws as it will result in the
glass breaking.
4. Slot the rear panel into the collars, with the
holes in the glass at the top.
5. Screw a grub screw into each collar to secure
the panel.
6. Slot the plastic plugs into each of the holes.
7. Screw the brackets to the inside of each pane
using the bolt assemblies.
Note: Ensure the short end
of the bolt assembly is on the
outside of the panels.
8. Place the top panel onto the brackets, ensuring
all holes line up.
9. Insert the plugs and attach the top panel to
the brackets with the bolt assembly.
GH266 (FT286 & FT287)_GH267 (FT288 & FT289)_ML_A5_v1_20210622.indb 5 GH266 (FT286 & FT287)_GH267 (FT288 & FT289)_ML_A5_v1_20210622.indb 5
Bracket
Glass Panel
Bolt Assembly
Plug
Bolt Assembly
GN Pan Layout
Model: FT287
1/6 1/6 1/6
1/3 1/6
1/3 1/6
UK
1/6 1/6
1/6 1/6
1/3
5
2021/6/22 15:43 2021/6/22 15:43