Led Display; Communication Interfaces; Bluetooth ® Interface; Activating The Bluetooth ® Interface - Dräger Polytron 6100 EC WL Instrucciones De Uso

en |
Operation
4.1

LED display

Symbol LED display Meaning
Green LED Gas detector is switched on
flashes once
Yellow LED Alerts (e.g., low battery or sensor warm-up
flashes once phase active) or maintenance mode
Yellow LED lights Error
up continuously
Red LED just A1 alarm (pre-alarm)
flashes rapidly
Red LED rapidly A2 alarm (main alarm)
flashes twice
Blue LED flashes
Bluetooth
once
Blue LED lights up
Bluetooth
continuously
mobile device
Yellow and blue Confirmation, internal battery counter reset
LEDs light up
When the LED display is active, the energy consumption increases.
36
®
active
®
active, connected to Windows
Instructions for use
4.2

Communication interfaces

®
4.2.1 Bluetooth interface
After the start sequence, the Bluetooth
activated.
If no connection is established, the gas detector disables the interface after 10
minutes (factory setting).
If the connection is to be secured with a pairing PIN, an additional pairing can
be carried out and an individual pairing PIN assigned. The factory setting is the
connection without PIN.
For safety-related applications, an individual pairing PIN must be assigned.
4.2.2 Activating the Bluetooth
®
● Activate the Bluetooth interface with a magnetic pen or via the
™
ISA100 Wireless network:
● Magnetic pen: Tap the marking (Fig. A 12).
™
● ISA100 Wireless : Activate using PolySoft.
✓ The blue LED flashes.
4.2.3 Establish Bluetooth
Prerequisite:
®
– Bluetooth interface on the device and on the Windows terminal device is
activated.
● Connect via PolySoft.
Entering a PIN is not necessary.
✓ After successful connection, the blue LED lights up continuously.
Gas detector and Windowsterminal device with PolySoft are connected.
4.2.4 Carry out Bluetooth
Prerequisite:
®
– Bluetooth interface on the device and on the Windows terminal device is
activated.
®
– Bluetooth pairing is activated (with PolySoft).
®
|
Dräger Polytron 6100 EC WL, Dräger Polytron
®
interface of the gas detector is
®
interface
®
connection without pairing
®
pairing and connect
®
Repeater ISA