Tabla de contenido
Idiomas disponibles
Idiomas disponibles
TOOLS
1 Step washer with large bore
2 Step washer with small bore
3 C frame
4 Spindle
5 Sleeve
Inner diameter: 44.4 mm
Outer diameter: 50.8 mm
Length: 45 mm
INTENDED USE
This tool set is used to replace ball joints, universal joints, brake anchor bolts etc. on SUVs, vans and
other vehicles with large parts.
SAFETY INFORMATION
Always use the lifting points designated by the vehicle manufacturer when raising the vehicle.
Always make sure when working under a vehicle that the vehicle is sufficiently secured by e.g.
axle stands, the wheels are wedged and the handbrake is engaged.
Always wear safety glasses, especially when working under vehicles.
Make sure that the tool is properly assembled.
Do not over-tighten spindle or use excessive force, as in doing so both the tool as well as the
part can be damaged.
Do not use an air Impact wrench; otherwise the spindle can be damaged.
Always use a workshop manual for detailed instructions.
Grease the threads on the spindle before using.
Check and replace damaged parts if necessary.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Ball Joint Tool Set with C Frame
Tel.: 02196 720480
Fax.: 02196 7204820
6 Sleeve
Inner diameter: 56.6 mm
Outer diameter: 63.4 mm
Length: 45 mm
7 Sleeve
Inner diameter: 69 mm
Outer diameter: 76.1 mm
Length: 56 mm
BGS 8263
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
