KlipXtreme LiteTouch KTE-005 Manual De Instrucciones página 5

7. A tone will be heard when the devices are
able to establish the wireless connection, and
the LED will change to blinking blue.
8. If after 60 seconds the pairing process fails,
please repeat steps 1 through 6 as described
above.
Note: If for some reason your earbuds do
not synchronize or become disconnected
during use, turn both earbuds off and on
again by pressing and holding the soft button
for 3 seconds. If they still can't get connected
put them back in the case and remove them
again. You can also press and hold the soft
button for about 9 seconds to reset the
earphones.
9. The earbuds will automatically go into
standby mode after a short period of
inactivity to save battery life.
10. You only need to pair the earbuds with your
phone once, as it will re-pair automatically.
11. The automatic re-pairing feature will allow
the earbuds to be reconnected after being
switched back on or when placed again
within wireless range.
4.3. Call management using your
wireless earbuds
• When there is an incoming call, your phone
will ring, the blue LED will blink once every
5 seconds, accompanied by a tone through
your earbuds.
• Touch the right or left button softly to
answer the call. You may also press the
answer button on your cellular phone to
receive the incoming communication in your
earbuds.
Note: Audio will be out from both earbuds.
• To end a call, simply touch the right or left
button softly once again.
• To reject an incoming call and send the caller
to voicemail, press and hold the left or right
button for about 2 seconds.
4.4. Music playback and voice
command using your wireless
earbuds
• Touch the soft button twice on any earbud
to play and stop audio playback.
• When listening to music, touch the left soft
button for 1.5 seconds to go to the previous
track, and press the right soft button for 1.5
seconds to go to the next track.
• To decrease the volume briefly touch the left
button of the earbuds. To increase the
volume briefly touch the right button.
• Touch the left button three times to activate
the voice assistant function.