Care And Maintenance - LF allen + roth LG-1009-LR Instrucciones De Montaje

3. Assemble the seat (C) to the left arm (B)
by inserting short bolt (AA) and washer (CC).
Don't tighten the bolts completely.
Hardware Used
Short Bolt (1/4 in. - 20
AA
x 0.787 in. L)
CC Washer
4. Assemble the seat (C) to the right arm (A)
by insert long bolt (BB) and washer (CC).
Again, don't tighten the bolts completely.
Hardware Used
Long Bolt (1/4 in. - 20
BB
x 1.378 in. L)
Washer
CC
5. Assemble the seat (C) to the left arm (B)
by inserting long bolt (BB) and washer (CC).
Assemble the back bar (E) to the right arm
(A) by inserting short bolt (AA) and washer
(CC). Check alignment of all hardware and
make corrections if necessary. Fasten all
bolts tightly with hex wrench (DD).
Hardware Used
Short Bolt (1/4 in. - 20
AA
x 0.787 in. L)
Long Bolt (1/4 in. - 20
BB
x 1.378 in. L)
CC Washer
Hex Wrench
DD

CARE AND MAINTENANCE

• Paint on this furniture might peel if it is not handled properly. Handle with care.
•
Clean frame with a solution of warm water and mild soap. Dry completely. Do not use bleach
or solvents. Use a fine automotive wax to maintain gloss on non-textured finishes.
• The finish on furniture is formulated and baked on to make it highly resistant to repellents and
lotions. However, to avoid discoloration, clean the frame as soon as possible after exposure.
• For best results, clean weave regularly with mild detergent and warm water. Cleaning will help
prevent mildew by washing out dirt particles that may become trapped. Shake out excess
moisture after rinsing and allow to dry thoroughly before storing.
3
DD AA
CC AA
x 2
x 2
4
x 1
A
x 1
C
5
BB
CC
x 4
x 1
x 5
x 1
4
Lowes.com/allenandroth
C
B
AA
CC
AA
CC
BB
CC