TOOLS
1
Chain tensioner locking pin,
2
Crankshaft thrust piece
3
Belt tensioner locking pin
4
Chain tensioner tool (oil pump
5
Chain tensioner locking clips (2x)
6
Camshaft control valve tool
7
Camshaft control valve tool
INTENDED USE
This tool set are designed for checking and setting the engine timing on 1.8L & 2.0L FSI / TFSI
engines type EA888 (Vehicle list in table below).
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATION
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer
to the vehicle-specific service literature, particularly the technical data such as torque values
and instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
for VAG 1.8 / 2.0L FSI / TFSI
Tel.: 02196 720480
Fax.: 02196 7204820
8
Camshaft control valve tool
9
Crankshaft thrust piece
10 Camshaft locking bolts (4x)
11 Chain sprocket locking tools
12 Chain sprocket locking tool
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
BGS 8928