Tabla de contenido
Idiomas disponibles
Idiomas disponibles
for VAG 1.4 / 1.6 / 2.0 TDI Common Rail
TOOLS
1 Camshaft Counter Holding Tool,
to be used as OEM T10051
2 Locking Pin for Crankshaft Locking Tool (No. 8)
3 Injection Pump & Camshaft Locking Pin (2x),
to be used as OEM 3359
4 Belt Tensioner Locking Pin,
to be used as OEM T10060A / T40098 / 3204
5 Internal Hexagon Wrench,
to be used as OEM T10264
6 Idler / Tensioner Locking Tool,
to be used as OEM T10265
7 High Pressure Pump & Camshaft Locking Pin (2x),
to be used as OEM T10492
8 Crankshaft Adjusting Tool,
to be used as OEM T10490
INTENDED USE
This tool set is used for setting and checking the engine timing.
The included tools are suitable for multiple VAG models / engines (see attachment).
More information regarding this item and a list of suitable engines and models can be found on our
website:
www.bgstechnic.com
SAFETY INFORMATIONS
•
Do not use the tool if parts are missing or damaged.
•
Use the tool for the intended purpose only.
•
Never place the tool on the vehicle battery. There is a risk of a short circuit.
•
Be careful when working with the engine running. Loose clothing, tools and other objects can
be caught by rotating parts and cause serious injury.
•
Keep children and other unauthorized persons away from the work area.
•
Do not allow children to play with the tool or its packaging.
•
Be careful when working on hot engines because of the risk of burn injuries.
•
If you remove the ignition key before repairing, you can prevent the engine from being started
accidentally and resulting in engine damage.
•
This manual serves as a brief guide and does not replace a workshop manual. Always refer to
the vehicle-specific service literature, particularly the technical data such as torque values and
instructions for disassembly/assembly, etc.
•
After repair or before starting the engine, turn a minimum of 2 turns by hand and check the
timing again.
•
Turn the engine only in the normal direction of rotation (clockwise unless otherwise specified)
•
Do not use locking tools for camshaft and crankshaft as a counter-holder, during loosening or
tightening screws on pulleys, camshafts or crankshafts. This can damage tools and engine
components. Only use tools that are suitable for this purpose.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Engine Timing Tool Set
Tel.: 02196 720480
Fax.: 02196 7204820
BGS 9208
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
