Trouble Shooting; Maintenance; Warranty; Disclaimer - König Electronic FTA31 Manual De Uso

Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 70
Note:
Please do not remove the recording device before it is unmounted.
The DVB-T receiver will automatically switch from active mode into standby mode after being three
hours in active mode counting from the last user's interaction and/or a channel change. A warning with
the message "Without action from user, the DVB-T receiver will go into standby mode within 2 minutes."

8. Trouble shooting

In some region, the digital terrestrial signal may be weak. We recommend you use the antenna with a
built-in booster for watching channels with a weak signal.
Problem
No signal found
No picture or sound
Scrambled channel message
No response to remote control
Forgotten channel lock code
Forgotten menu lock code
If you move the DVB-T
receiver to another room you
are no longer able to receive
digital reception

9. Maintenance:

Clean only with a dry cloth. Do not use cleaning solvents or abrasives.

10. Warranty:

No guarantee or liability can be accepted for any changes and modifications of the product or damage
caused due to incorrect use of this product.

11. Disclaimer:

Designs and specifications are subject to change without prior notice. All logos, brands and product
names are trademarks or registered trademarks of their respective holders and are hereby recognised
as such.

12. Disposal:

This product is designated for separate collection at an appropriate collection point. Do not
dispose of this product with household waste.
For more information, contact the retailer or the local authority responsible for waste
management.
Possible cause
Aerial is disconnected
Aerial is damaged/misaligned
Out of digital signal area
Tuned to digital teletext channel
Channel is scrambled
Receiver off
Handset not aimed correctly
Front panel obstructed
Hand set batteries exhausted
The aerial feed former new
point may come through a
distribution system which may
reduce the digital signal now
received by the box.
14
What to do
Check aerial lead
Check aerial
Contact your dealer
Turn to another channel
Select alternative channel
Plug in and turn on plug
Aim handset at front panel
Check for obstructions
Replace handset batteries
Delete locked channel and
scan channels again
Contact help line
Try the universal password:
"3330"
Try a direct feed from the
antenna
loading