Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Existing Construction – accessible from above
C11
EXISTING FAN
Remove an existing fan and check to make sure the
opening is large enough to accommodate the new
motor housing (8"x 8 1/2").
Cut out an opening for the housing.
C13
5/8
1/2
Position the correct depth mark at the bottom edge of the
joist based on the thickness of your sheetrock.
41943-01 1/13/2006
All manuals and user guides at all-guides.com
OR
5/8
1/2
NO EXISTING FAN
Use the motor housing as a template to mark position.
C12
E
Slide the mounting rails into brackets.
C14
Mark position of screws by using holes as a template.
D
11
Tabla de contenido
