MSA F1 XF Manual Del Usuario página 11

Push-to-Talk Module
Specification
Interoperability
Technical
specifications
Batteries
Weight
Environmental
conditions
7 Marking
References
GA010B142W5X
GA010B146W5X
GA010B143W5X
GA010B145W5X
GA010A142W5X
GA010A146W5X
GA010A143W5X
Description
Operates with an MSA Headset, in particular helmet mounted headsets for
Gallet F1 XF fire helmets
-
PTT with yellow connector: for flexible microphone headset PTT, non ATEX
-
PTT with green connector: for flexible microphone headset, ATEX
(for use with ATEX radios)
-
PTT with red connector: for bone conductive microphone headset, non ATEX
-
PTT with blue connector: for bone conductive microphone headset, ATEX
(for use with ATEX radios)
Amplifier Adjustable gain (0 to 26 dB), bandwidth 300 Hz - 3 kHz
Nominal output 50 mV RMS, Harmonic distortion 5%
-
Recommended
-
headset batteries
for non-ATEX
applications
Pincer version
Clip Version
Weight may vary depending on radio plug and cable type (straight, coiled, etc.)
Use: -20 °C to + 65 °C, relative humidity 0 to 98%
Storage: -40 °C to + 80 °C, relative humidity 0 to 98%
Communication Accessories and Hearing Protection F1 XF
CR2032
2 x CR2032
ATEX Parameters
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 6,8uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Ui ≤ 4,2V, li ≤ 1,11A, Pi ≤ 4,68W, Ci ≤ 5,7uF, Li = 0
Marking
GB
11