Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Close the shut-off valve on the suction hose (2)
Connect the compressed air source with the compressed air
connection (3) and open the valve.
The valve is open when the handle of the valve is positioned in the
flow direction.
Select a suitable suction pipe (4).
Insert the suction pipe (4) into the dipstick pipe and connect with the
suction hose (2).
Open the valve on the suction hose (2).
The valve is open when the handle of the valve is positioned in the
flow direction.
Once the suction process has finished, close the valves on the suction
hose (2) and compressed air connection (3).
The valves are closed when the handles are positioned crosswise to
the flow direction.
Separate the compressed air supply from the tank.
The amount of oil extracted can be read on the scale of the measuring
cylinder.
Finally, empty the oil located in the measuring cylinder into the tank.
For this purpose, open the shut-off valve on the bottom side of the
measuring cylinder.
DRAINING
Close the valve at the compressed air connection (3).
The valve is closed when the handle of the valve is positioned
crosswise to the flow direction.
Separate the unit from the compressed air supply.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
