USING YOUR GARMENT STEAMER
BEFORE FIRST USE
Remove any stickers or protective covers from the steam head.
Unwind and straighten the cord before use.
When operating the garment steamer for the first time, allow it to steam for a few
minutes. This will remove any impurities and odors that might have been left by
the manufacturing process.
Warning: to avoid an electrical circuit overload, it is recommended that no other
appliances are plugged into the same circuit as your garment steamer when it is in
use.
Note: when unpacking the garment steamer, check to see you have received all of
the items listed in the parts list, before discarding the packaging.
ASSEMBLING/OPERATING YOUR GARMENT
STEAMER
1. Press the water tank release buttons, pull out the water tank, open the water
inlet cover and fill tap water into the water tank until it reaches the MAXIMUM
level (see fig.1). Always ensure the water tank is at least a third full. Do not
exceed the MAXIMUM level when filling the water tank. Put the tank back into
the unit.
2. Hold the appliance with your hand positioned safely at the neck of the garment
steamer in an upright position, use your other hand to attach the fabric brush
onto the steam head. The fabric brush can be attached either way and will lock
into position with an audible "click".
3. Connect the appliance to a power outlet and switch on. Press the power button,
the power indicator light will be flashing and the appliance will begin to heat.
When the lights stop flashing, the preheat has finished and you can start using
the garment steamer. Switch OFF the steamer by pressing the power button.
When the appliance is powered off the indicator light will not be lit.
4. This garment steamer has an automatic shut-off function. When the user stops
operating this product, the internal control circuit will be cut off from the power
supply after 8 minutes.
TO STEAM GARMENTS
The garment steamer is easy to use and is ideal for removing wrinkles/creases
from garments and curtains as well as refreshing furnishing fabrics.
It can be used on most fabrics as long as the fabric is hanging or where the
garment steamer can be easily used in an upright position moving over the fabric
07