Headphone Connection; Connecting The Antenna; Operation And Battery Indication; Attachment Of The Receiver - Sennheiser EK 3052-U Instrucciones Para El Uso

LED
13

Headphone connection

Connect the headphone to the 3.5 mm Ø stereo jack on the EK 3052-U. If you use the
receiver as part of the in-ear monitoring system, please connect the suitable in-ear
headphone. If you use the receiver for other applications, you can also connect any
Sennheiser stereo headphone with an impedance of more than 8 Ω per system.
14

Connecting the antenna

Connect the supplied antenna to the 2.5 mm Ø mono jack on the EK 3052-U.
15 Operation and battery status indication
The red LED at the top of the EK 3052-U provides information on the (remaining)
capacity of the battery or accupack in use:
Constant light:
The receiver is switched on and the battery capacity is sufficient.
Flashing:
The battery / accupack is going flat! If the receiver is operated with
accupacks, replace the accupack immidiately. If the receiver is operated
with batteries, the remaining operating time is 15–20 minutes maximum.
16

Attachment of the receiver

With the supplied clip, the receiver can
be attached to the belt.
23