Hama RC 660 Instrucciones De Uso página 6

5.1. Automatic date/time setting using the DCF signal
• Once you have inserted the batteries, the display is switched on, an acoustic signal
sounds and the alarm clock automatically starts searching for a DCF radio signal.
During the search, the radio icon /
minutes.
• When the wireless signal is received, the date and time are automatically set.
Display
Display flashing
Display steady (not flashing)
Not displayed
• Press and hold the MIN/ DATE button (10) for approx. 3 seconds to start a manual
search for the DCF radio signal.
Note – Time settings
• If, during initial setup of the device, no DCF radio signal is received within the
first few minutes, the search is aborted. The radio icon will go out.
• If there are reception problems, we recommend leaving the clock to sit overnight,
since interference is generally less at night.
• In the meantime, you can start a manual search for the DCF radio signal at
another location or you can manually set the time and date.
• The clock automatically continues to search for the DCF signal every hour. If the
signal is received successfully, the manually set time and date are overwritten.
All manuals and user guides at all-guides.com
will flash. This process can take 3 to 5
/
Searching for the DCF signal
Active
Successful – signal is being received
Inactive – no signal reception
5