Sony SU-PF2 Manual De Instrucciones página 8

Mounting a TV
WARNING
If you allow the AC power cord to be pinched under or between pieces of equipment, this may result in a short
circuit or an electric shock.
If you stumble over the AC power cord or the connecting cable, the stand may topple over and cause injury.
Decide on the installation location and lay the stand down before installing the TV.
Since the TV is heavy, it is recommended that you decide on the installation location and lay the Floating Stand
down before installing the TV.
Note
Do not push or pull the Floating Stand while it is on the floor. The rubber footings on the base of the Floating
Stand may come off.
1
Detach the Table Top Stand from the TV.
1 Place the TV, with its screen facing down, on a stable, cloth-covered work surface, at least 20 cm (8 in) off
the floor.
2 Remove the screws that hold the TV to the Table Top Stand.
At least 20 cm
(8 in)
8
(US)
Rear side of the TV
1
Soft rag
2