Sony SU-P42T2 Manual De Instrucciones página 8

2 Be sure that two or more persons hold the right and left edges of the top and the under sides of the
Display Unit while fitting the hooks on the rear of the Display Unit into the holes on the fixtures of the
stand. Then confirm that the hooks on the rear of the Display Unit are completely inserted into the four
holes of the fixtures.
Note
Do not stumble over the mains lead or the
Display Interface Cable.
3 Slide the Display Unit straight downward until it snaps on.
Notes
• Slide the Display Unit completely down
to the bottom. Confirm that the Display
Unit is installed on the stand
horizontally.
• Be sure to keep the Tabletop Stand stable
while installing the Display Unit.
2
Attach the Display Unit to the stand with the two securing screws.
8
(GB)
Rear side of the
Display Unit
Side View
Hook
Securing screws