Technical Data - BGS technic 99710 Guia De Inicio Rapido

TECHNICAL DATA

Illuminant: 20 SMD LED (Type 2835)
Brightness: 350 - 450 lumens
Color temperature: 6000 - 7000K
Power supply: 220 - 240V / 50Hz
Power: 6W
Cable: 5 meters rubber wire (IP20)
ATTENTION
Read all instructions and hazard statements before use and store this manual for future reference.
INTENDED USE
This LED Workshop Light is used to illuminate of dry indoor areas.
SAFETY ADVICE
•
This fixture must always be used in accordance with all electrical and safety codes and ordinances.
•
Observe electro technical regulations and occupational safety regulations.
•
Attention: This lamp is designed for indoor use only, keep the lamp dry.
•
Be careful that the cable is laid without damage, squeezed or heat damaged cables are a safety
hazard. Do not use the lamp if the cable is damaged in any way.
•
This light is not explosion proof. Do not use the lamp in areas where flammable or explosive gases
are present.
•
Never use the light when the safety glass is broken or removed.
•
Never look directly into the light source. The LEDs are extremely bright and can damage the eyes
during prolonged exposure to light.
•
Keep the lamp away from heater fans, radiators or other heat sources.
•
Keep the lamp out of the reach of children.
•
Do not let children play with the lamp or its packaging.
•
The lamp must only be repaired by trained service personnel.
•
Opening or attempting to open or repair the lamp will void the warranty and may result in product or
personal injury.
CLEANING
Clean the lamp only with a soft cloth and a little mild detergent.
Attention! Never immerse the lamp in a liquid and do not use petrol, turpentine, aerosols or other
chemicals for cleaning.
ENVIRONMENTAL PROTECTION
Recycle unwanted materials instead of disposing of them as waste. All tools, accessories and
packaging should be sorted, taken to a recycling centre and disposed of in a manner which is
compatible with the environment.
DISPOSAL
Dispose of this product at the end of its working life in compliance with the EU Directive on
Waste Electrical and Electronic Equipment. Contact your local solid waste authority for
recycling information or give the product for disposal to BGS technic KG or to an electrical
appliances retailer.
LED Workshop Light
BGS 99710