Buttons - Sartorius Entris II Essential BCE Serie Manual De Instrucciones

Operating Concept
4.2.1

Buttons

Symbol Designation
[On/Off] button
[Menu] button
[Zero] button
[Tare] button
[Print] button
[isoCAL] button
[Adjust] button
[GLP] button
[Ambient
condition] button
[Application filter]
button
[Toggle between
weight units]
button
[Back] button
[Up] button
12 Entris BCE Operating Instructions
®
Description
— When the button is pressed: Switches the operating display on.
— If the button is held down: Switches the operating display off.
— When the button is pressed: The settings menu opens.
— If the button is held down: It switches to version display.
Zeroes the device.
Starts taring.
Exports the readouts to the integrated data interfaces.
If the button is flashing: Starts the isoCAL function.
If the button is not flashing: Starts the set calibration and adjustment function.
Starts the set calibration and adjustment function.
— Exits the GLP printout and starts printing the GLP footer.
— If the "Net-total", "Totalizing", or "Statistics" application is active: Prints and
deletes the saved values and exits the application.
Switches between the ambient conditions "V.STABLE", "STABLE", UNSTABL." and
"V.UNSTBL.".
Switches between the "weighing" and "filling" application filters.
If the "Toggle between weight units" function is active:
— If the button is held down: Accesses the "Toggle between weight units"
function menu.
— When the button is pressed: Switches between the basic unit display and up to
4 other units.
— In the menu:
— When the button is pressed: Returns to the previous display.
— If the button is held down: Saves the menu settings.
— When entering digits: Selects the previous digit position.
— For an active application: Exits the application and deletes the set reference
value.
— In the menu: Scrolls through the menu levels or the available parameters.
— When entering digits: Increases the displayed value.
— In the main display of an active application: Switches to the display of the
current weight value | parameter.