Tabla de contenido
Idiomas disponibles
Idiomas disponibles
COMPONENTS
1
Scale
2
Direction of rotation switch
3
Locking screw
4
Handle
5
Ouput square drive
HOW TO USE
1. Balancing wrench in hand with graduations visible with the marked arrow Elementary Scale up
then unlock knurled handle by turning the locking screw counter-clockwise.
2. Set amount of torque required by turning knurled handle to read exact amount on case
graduations.
EXAMPLE: 102 N
a) Turn knurled handle until the zero graduation on the bevel edge of
the knurled handle is lined up with the vertical mark on the case and
is even with the 98 Nm graduation.
b) Turn knurled handle clockwise until 4 Nm graduation on the level
edge of the handle is in line with the vertical line on the case.
c) Lock handle securely by turning lock nut clockwise, and now wrench
is set at 102 Nm which is ready to use.
3. Install a proper socket or attachment to the square drive and apply to nut or bolt and pull handle
until you feel and / or hear wrench click. Release the torque wrench, it is automatically reset for
next operation.
4. Do not continue to pull after wrench releases. Use special care at low torque settings that will pull
stop when wrench clicks.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
L
d . l h
a t s
w
s
@
o f n i
: l i
Tabla de contenido
