BGS technic 3065 Manual De Instrucciones página 6

FILLING WITH BULK GREASE
1
Disassembly the sleeve from the
top of unit.
2
Dip the sleeve into the grease.
Pull back the piston against the
spring mechanism.
When the piston rod is drawn
more, the sleeve must be dipped
deeper.
Filling is completed when the
piston is moved back to the stop.
Pull sleeve out of the grease
and clean the outside of the
sleeve.
3
Install the sleeve again at the
top of the unit.
4
Push the release button.
The piston is pushed forward by
the spring mechanism.
Install the nozzle tube with nozzle onto the grease gun.
Press the valve (V) and press
pump lever several times, to
push air out of the grease gun.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
[email protected]
V
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed