Grounding Instructions; Cleaning And Maintenance - Ventamatic HeTR H1500 Manual Del Usuario

Ocultar thumbs

Contenido

Tabla de contenido

Idiomas disponibles

This heater is for use on 120 volts. The cord has a plug as shown at A in figure. An

adapter as shown at C is available for connecting three-blade grounding-type plugs to

two-slot receptacles. The green grounding lug extending from the adapter must be

connected to a permanent ground such as a properly grounded outlet box. The adapter

should not be used if a three-slot grounded receptacle is available.

GROUNDING PIN

Model Number

Power Supply

Power Consumption (Wattage)

CLEANING AND MAINTENANCE

Before any cleaning, make sure that:

1. Power the unit OFF and unplug. Wait until it has completely cooled down.

2. Disconnect power supply at source by removing plug from power outlet.

3. Your heater is now ready for cleaning.

4. Do not use cleaning liquid or other chemicals to spray on the unit.

Ventamatic, Ltd.

P.O. Box 728, Mineral Wells, TX 76068-0728