Idiomas disponibles
Idiomas disponibles
Waste Oil Drain Receiver, 30 l
SPECIFICATIONS
Capacity: 30 l
Funnel diameter: 429 mm
Adjustable height: 760 to 1600 mm
Material of funnel and container: Plastic
Material of downspout: Steel
PARTS
1 Funnel
2 Two-piece downspout
3 Clamp
4 Tank
ASSEMBLY INSTRUCTIONS
1. Remove all contents from the package.
2. Assemble two-piece down spout using the provided bolt, nut and washer.
3. Insert the funnel into the downspout using the Philips screws to secure.
4. Install clamp on to tank neck.
5. Insert down spout and funnel assembly into tank, tighten clamp at desired
height.
IMPORTANT
Please read the entire contents of this manual prior to installation and operation.
By proceeding you agree that you fully understand and comprehend the full contents of this manual.
Forward this manual to all operators.
Failure to operate this equipment as directed may cause injury.
SAFETY INFORMATIONS
•
Do not operate this machine until you read and understand all the dangers, warnings and cautions in
this manual.
•
Keep this operation manual near the machine at all times.
•
Make sure that all users read this manual.
•
Oil Drains are designed and built with safety in mind.
•
However, proper training and thoughtful operation on the part of the operator can increase your
overall safety.
•
Do not exceed rated capacity. Overloading can cause damage to or failure of the oil drain.
•
Keep hands and body clear of all pinch points.
•
This oil drain is designed for use only on hard level surfaces capable of sustaining the load. Use on
other than hard level surfaces can result in instability and possible loss of load.
•
No alterations to the oil drain shall be made.
•
Always maintain a clean work area.
•
Keep visitors and especially children away from work area.
•
This oil drain is to be operated by properly trained personnel only. Operation by untrained personnel
may result in personal injury and property damage. Failure to heed these warnings may result in loss
of load, damage, and failure resulting in property damage, personal or fatal injury.
DISPOSAL
Dispose of used oil and other automotive fluids in compliance with local, state and federal environmental
laws and regulations.
SW-Stahl und Werkzeugvertriebs GmbH
5
d i e
6
e
s
s
a r t S
h
c
s
m
e
R
Tel. +49 (0) 2191 / 46438-0
r e
F
ax +49 (0) 2191 / 46438-40
s
u
k r e
v
e
7
9
8
2
4 -
D
e
BGS 8640
L
d . l h
a t s
w
s
@
o f n i
: l i
