Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Height-adjustable Legs (4)
■
1.
Place seat upside down and insert a leg assembly into
any hole found at each corner. Turn counter-clockwise
until leg is fully tightened. Repeat until all four legs have
been secured to seat. Note: Legs will be flush with seat
when fully-tightened. (Figure 2)
2.
Insert bottom of each armrest into slots located on the
short edges of the seat. (Figure 3)
3.
Insert the bottom of the backrest into slot located at the
rear of the seat. (Figure 4)
4. Adjust leg height to be the same on each of the four legs.
Use the visible height indicator making sure it shows
through the same window on each leg. Press down fully
on center of seat to test stability before use.
Adjusting leg height
1.
To decrease height, turn the foot piece on the leg,
counter-clockwise. Repeat with all until they are the
same preferred height.
2.
To increase height, turn the foot piece on the leg
clockwise. Repeat with all until they are the same
preferred height.
3.
Press down firmly on the center of the seat to test
stability. Make any necessary adjustments to ensure
the shower chair is leveled. (Figure 5)
Maintenance
Periodic visual inspection of this shower chair is
recommended to ensure that all parts and hardware are secure,
that components are in good working order and not worn, torn, frayed,
or loose, and that there are no obstructions or impediments to normal,
safe operation. If any part or mechanism appears to be unsafe or damaged,
do not use the product. If you experience problems, please contact Medline
at 1-800-MEDLINE | 1-800-268-2848.
Cleaning
1. Clean with regular household cleaning products. Use a non-abrasive cleaner with
warm water. Wipe dry after cleaning.
2. DO NOT use abrasive powders, cleaners or scouring pads.
Backrest (1)
■
Figure 2
Figure 3
Figure 4
Figure 5
G2-105RX1 (PIC-00303) (07-29-2021)
2
3
4
5
3
Tabla de contenido
