THOMSON ROC 36 Manual Del Usuario página 5

Ocultar thumbs Ver también para ROC 36:
Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 21
01-ROC 36 GB
26/02/04
All manuals and user guides at all-guides.com
6 - Controlling volume in satellite and cable mode
Since some satellites and cable receivers have no volume control, the
the television's volume in satellite or cable mode. For satellite systems with a volume control, you can choose the
product that the
(8) and VOL (7) keys will control: the television volume or the volume of the satellite or cable
receiver.
To choose, proceed as follows:
1. Press the TV key (2) (the remote control must be in TV mode for this procedure).
2. Hold down the S key (17) until the red indicator lamp (1) remains lit (the indicator
light remains on for a few seconds to give you the time to proceed with the following
steps. The indicator lamp flashes when this time is almost up, and then goes off).
3. Release the S key (17).
4. Press the
key (8) for around 8 seconds. The indicator light will blink and then
go off for about 8 seconds before blinking once more and then staying off.
5. If the remote previously controlled the television volume in SAT mode, it will now
control the volume of the satellite receiver; if it previously controlled the volume of the
satellite receiver, it will now control the television volume.
The THOMSON NAVILIGHT system allows you easy access to the settings of your
television (TV) or video recorder (VCR).
1. Switch on the product you want to control.
2. Select the type of product concerned. In the VCR position, make sure that the AV
mode is activated for the TV set (the SCART socket must be selected).
3. Press the S/SHIFT key (17) once and then press a/MENU (6).
4. To travel through the setting menus, press the S/SHIFT key (17) and then use the
up, down, left, right (7 and 16). You must press the S (17) key and arrow
key at the same time.
You must press the S (17) key for every arrow key press and release.
5. Validate with S/SHIFT (17) +
6. To exit the menu, press the S/SHIFT key (17) once and then press I/EXIT (15).
You can contact THOMSON by dialling: 0871 712 1312
(For Great-Britain, all calls will be charged 0,10£ / mn)
18:22
Page 5
7 - The NAVILIGHT system
/OK (8).
For Switzerland: 0 900 905 980 (0,18CHF / mn)
www.thomson-europe.com
5
remote control allows you to control
ROC 36
+
+
+
+
Tabla de contenido
loading

Este manual también es adecuado para:

Roc 26

Tabla de contenido