Equipment Identification - IARP BRERA Instrucciones De Uso

Modello - Model - Modèle
Modell - Modelo
Fabbricante - Constructeur
Manufacturer - Hersteller
Fabricante
7. NOTES AND WARNINGS
L'apparecchio descritto in questo manuale è conforme alla direttiva macchine 2006/42/CE.
Il contenuto di questo manuale è di natura tecnica e di proprietà di EPTA s.p.a. è vietato riprodurre, divulgare o modificare interamente
o parzialmente il suo contenuto senza autorizzazione scritta. La società proprietaria tutela i propri diritti a noma di legge.
Leggete attentamente il manuale e rispettate i contenuti prima di installare ed utilizzare l'apparecchio.
The company cannot be held in any way liable for any damage to people, animals or the product conserved in the event of:
• Improper use of the equipment or use by unsuitable or unauthorised staff.
• Incorrect installation or power supply not suitable for the appliance.
• Non-compliance with this manual.
• Non-compliance with the maintenance program.
• Unauthorized modifications to the appliance.
• Installation of non-original spare parts on equipment.
• Installation and use of the equipment for aims differing from those specified in this manual.
• Tampering with or damage to the power supply cable.
Responsibility for application of the safety provisions outlined below is the responsibility of the technical staff responsible for the
activities planned on the equipment, who must ensure the authorised staff:
• Are qualified to perform the task requested
• Know and strictly comply with the provisions contained in this document
• Know and apply the general safety standards applicable to the equipment.
Tampering with or unauthorised replacement of one or more parts of the equipment, use of accessories
that change its use and use of spare parts differing from those recommended can cause risks of accidents.
Any intervention on the equipment strictly requires disconnection of the power socket and however no
guard (grids, casings) should be removed by unqualified staff; strictly avoid operating the freezer with
these guards removed.
8. USE
THE APPLIANCE IS SUITABLE FOR COOLING DRINKS AND/OR PRE-PACKAGED FRESH PRODUCE.
THE EQUIPMENT MUST ONLY BE USED TO CONSERVE, DISPLAY AND SELL BEVERAGES IN
CANS OR BOTTLES.
THE APPLIANCE IS INTENDED FOR THE SOLE STORAGE OF PRE-PACKAGED PRODUCTS.
THIS APPLIANCE IS ONLY DESIGNED FOR USE AT A MAXIMUM ALTITUDE OF 2000 METRES ABOVE
SEA LEVEL.
THE APPLIANCE CANNOT BE USED FOR THE PRESERVATION OF PHARMACEUTICALS.
The manufacturer cannot be held liable for damage caused by people, property or the equipment itself due to display of
products other than the afore-specified.
9.

EQUIPMENT IDENTIFICATION

• Located on the plate affixed to the machine to detect the technical data.
• Check the model and power supply voltage before carrying out any operation.
• If discrepancies are found, immediately contact the manufacturer or the company that supplied the equipment.
1. Manufacturer
2. Code
3. Conformity marking
4. Power supply voltage (V)
5. Power supply frequency (Hz)
6. Absorbed electrical power (W)
7. Absorbed electrical power in defrosting (W)
8. Light max. power (W)
9. Gross volume
10. Type and quantity of refrigerant
11. Climate class
It is strictly forbidden to remove, tamper with the plate and change or alter the
data contained in it.
BRERA
CHELSEA
TROCADERO
EPTA S.p.A. - Sede legale
Via Mecenate, 86 - 20138 Milano – Italy
Capitale € 68.515.000 - R.E.A./MI – 1730229
Registro delle Imprese e Cod.Fiscale n. 04160730968
Partita IVA 04160730968
1
6
5
4
7
8
9
3
2 5 / 9 6
PAGE
UM000492
N° DOC
2
10
11
*Example of data
plates
11