Start/Pause Button; Important - Zanussi ZWG1100 P Manual De Instrucciones

Tabla de contenido
Idiomas disponibles

Idiomas disponibles

Extra Rinse Option (

Start/Pause button (

Program progress display
14

Important!

The selected delay can be changed only after selecting
the washing program again.
The door will be locked throughout the delay time. If you
need to open the door, you must first set the washing
machine to PAUSE by pressing the Start/Pause (
button and then wait about 3 minutes.
After you have closed the door, press the Start/Pause
button again.
This option is recommended for people who are allergic to
)
detergents, and in areas where the water is very soft.
The machine performs some additional rinses.
To select this option PRESS and HOLD the Spin (
and Quick Wash (
selected after choosing the desired program
and before depressing the Start/Pause (
button) untill the pilot light is turn on.
To turn the Extra Rinse option off press and hold the same
buttons until the pilot light goes off.
To start the selected program, press the "Start/Pause
)
(
)" button; the corresponding green pilot light stops
flashing.
The "Washing (
starts operating and the door is locked.
To interrupt a program which is running, depress the
"Start/Pause (
light starts to flash.
To restart the program from the point at which it was
interrupted, press the "Start/Pause (
If you have chosen a delayed start (
begin the countdown.
(Washing)
When the pilot light "
machine is performing the washing cycle.
(Extra Rinse)
When the pilot light "
The machine performs some additional rinses.
(End Cycle)
When the program has finished, the "
comes on.
) button together (This must be
)" light is on to indicate that the appliance
)" button: the corresponding green pilot
" comes on this means that the
" comes on this means that the
)
)
)
)" button again.
), the machine will
" pilot light
Tabla de contenido
loading

Este manual también es adecuado para:

Zwg1120 p

Tabla de contenido