Lcd Display Information - Topcom Twintalker 3700 DUO PACK Manual Del Usuario

Tabla de contenido
Idiomas disponibles
  • ES

Idiomas disponibles

  • ESPAÑOL, página 35
TOPCOM TWINTALKER 3700
10

LCD DISPLAY INFORMATION

j
i
h
g
f
e
11
BATTERY CHARGE LEVEL/LOW BATTERY INDICATION
The BATTERY CHARGE LEVEL is indicated by the number of squares present inside the BATTERY icon on the LCD
Screen.
When the BATTERY CHARGE LEVEL is low, the BATTERY icon will flash to indicate that the batteries need to be
replaced or recharged.
12
RECHARGING BATTERIES
The PMR can be used with 3 alcaline or rechargeable NiMh AAA batteries..
Only use the included AC/DC ADAPTER with "AAA" rechargeable batteries . Do not try to
charge this unit when regular "AAA" alkaline batteries are installed.
When using rechargeable batteries you can use an optional adapter to charge.
2
4
All manuals and user guides at all-guides.com
a.
TX icon - Displayed when transmitting a signal
a
b.
RX icon - Displayed when receiving a signal
b
c.
Channel number
d.
CTCSS code
e.
Speaker volume indicator
c
f.
Lock icon - Displayed when the keypad is locked.
g.
Battery charge level indicator
d
h.
VOX icon - DIsplayed in Voice controlled (Vox) mode
i.
Scan icon - Displayed when scan mode is active
j.
Dual Scan icon - Displayed when dual scan mode is active
Battery Full
Battery 2/3 charged
Battery 1/3 charged
Battery empty
Dispose of batteries at a designated battery disposal unit and
not in the household waste. Do not short-circuit & dispose of in
fire. Remove the batteries if this device is not going to be used
for a long period.
• Insert 3 "AAA" rechargeable batteries.
• Plug the small plug of the adapter into the SPK/MIC/CHG jack (2) and the other end in
the electrical socket.
• Make sure that the unit is switched off in order to charge the batteries properly. There is
no charge indicator during charging at OFF mode.
NOTE: It takes approximately 7 to 10 hours to fully charge the batteries.
TOPCOM TWINTALKER 3700
Tabla de contenido
loading

Tabla de contenido