Assembling; Sausage Maker - Cuisinart MG-100 Serie Manual De Instrucciones Y Libro De Recetas

ASSEMBLING

Make sure unit is unplugged
while assembling.
Assemble the meat grinder feeder head prior to
attaching to the housing.
1. Insert the feed screw pin into the open end of
the attachment.
2. Place the cutter with the flat side facing
out toward you over the feed screw pin (this
is an important step or the meat grinder will
not work).
3. Place the grinding plate over the cutter on the
feed screw pin. Align tabs with notches.
4. Screw on the ring nut by turning it clockwise
and hand lightly tighten. Do not over tighten.
5. Fit the hopper onto the top of the meat grinder
and put a mixing bowl under the grinder to
catch food.
6. Insert grinder/feeder head tightly into
attachment opening. Twist on to lock.
7. Use the food pusher to gently feed food,
one piece at a time. Do not overload the feed
tube. Do not force the food into the grinder/
feeder head.
CUTTING PLATES
Medium Cutting Plate – Great for ground meat
used in soups, or for relishes
Coarse Cutting Plate – Great for ground meat
used in chili and sausages, or for vegetables
THESE PLATES ARE NOT
DISHWASHER SAFE.
PLEASE HAND-WASH ONLY!
DRY COMPLETELY AND
COAT IN VEGETABLE OIL.
NOTE – REVERSE SWITCH
If the motor slows or stops, it may be due to
jammed food. Immediately switch the Cuisinart
Electric Meat Grinder to its OFF position. Put the
On/Off/Reverse switch in the REVERSE position
to push the food in the opposite direction. Put
the On/Off/Reverse switch in the ON position
and turn the Electric Meat Grinder on again. If
the Electric Meat Grinder should get jammed
again, you may need to switch it off, unplug,
disassemble the grinder head, and clean the
internal parts.
HOW TO USE
1. Before first use, wash and dry all parts of the
Cuisinart Electric Meat Grinder.
®
2. Place the Cuisinart
stable work surface.
3. Make sure the On/Off/Reverse switch is in the
OFF position.
4. Secure the meat grinder assembly to the unit.
5. Insert plug into wall outlet.
6. Place a wide, shallow bowl or plate beneath
the grinder tube to catch food.
7. Switch appliance to ON position. The
Cuisinart Electric Meat Grinder must ALWAYS
®
be ON before adding food.
8. Place food on the hopper and use pusher to
feed food through opening.

SAUSAGE MAKER

Assembling Sausage Maker
Attachment
Assemble the sausage maker attachment prior to
attaching to the housing.
1. Insert the feed screw pin into the open end of
the grinder.
4
Electric Meat Grinder on a
®
®