Tabla de contenido
Idiomas disponibles
Idiomas disponibles
USE
1. Remove seal from the injector.
2. Clean the sealing surface on the injector by turning
the injector seat cutter (2) clockwise.
3. Insert the cutter into the injector opening of cylinder
head and clean the sealing surface of the bottom of
the cylinder head by turning the cutter (1) clockwise.
4. Check sealing surface after cleaning by visual
inspection, if sealing area is clean, mount the
injector with a new sealing ring.
BGS technic KG
Bandwirkerstr. 3
D-42929 Wermelskirchen
Tel.: 02196 720480
Fax.: 02196 7204820
www.bgstechnic.com
© BGS technic KG, Copying and further use not allowed
Tabla de contenido
