Tabla de contenido
Idiomas disponibles
Idiomas disponibles
Estimated Assembly Time: 50 - 60 minutes.
WARNING
!
For your safety, never connect plug to power source
receptacle until all assembly and adjustment steps are
complete, and you have read and understood the safety
instructions.
ASSEMBLING CABINET STAND
(FIG. A, A-1, A-2, A-3, A-4, A-5)
1. Bag "A" - Thread the feet (2) with hex nut (1) into
each hole of two side plates (3, 8).
NOTE: Adjust the level of stand. When the feet are
adjusted properly, turn the hex nuts against the leg of
side plate to secure them. Loosen the hex nut before
any adjustment.
Fig. A
2. Bag "B" - Attach R.H. side plate (3) (with holes on
side) to the tool tray (4) with four carriage bolts (5) and
hex nut w/ washers (6).
3. Repeat above steps for the L.H. plate (8). Securely
tighten nuts.
Fig. A-1
4
6
4. Bag "B" - Attach top plate (7) to the L.H. side plate
(8) and R.H. plate (3) with eight carriage bolts (5) and
hex nut w/ washers (6). NOTE: Top plate flanges fit
inside side plates.
All manuals and user guides at all-guides.com
ASSEMBLY AND ADJUSTMENTS
3
1
2
Fig. A-2
8
5. Bag "B" - Mount the back plate (9) to the top plate
(7) and tool tray (4), then fasten with four screws w/
washers (10).
Fig. A-3
7
8
6. Bag "C" - Insert the door knob (11) to the hole of
door plate (12) with one hex screw (13) and washer
3
(14).
Fig. A-4
14
5
11
4
13
11
7
6
5
3
9
10
3
12
Capítulos
Tabla de contenido
