Parts List; Operation - Lacor 69061 Manual Del Usuario

1.- Place the lower "U" support on the work table.
2.- Remove the fastening screw and insert the height supplement tube. A lamp height between
29 and 53 cm from the table can be selected.
3.- Remove the other fastening screw and insert the lamp´s upper support in its location.
Firmly fasten it with the screw.
ATTENTION: Be sure to remove the protective cardboard placed in lamp.
4.- Connect the plug to the power point.
5.- Press the on switch (the light will turn on). Soon you will notice the heating effect of the
lamps.
6.- Place the foods under the lamps in order for them to remain warm.
7.- If you consider the temperature to be excessive, raise the lamps to their maximum height
(53 cm). On the other hand, if you consider the temperature to be insufficient, bring them as
close as possible (39 cm).

PARTS LIST

4
5
7
6
1

OPERATION

1.- Lower "U" support
2.- Height supplement tube
3.- Fastening screw
4.- Upper lamp support
5.- Lamp
6.- Bulb 275 W.
7.- Switch ON/OFF
4
5
7
6
1
2
3
1
21