Operation; Cleaning / Maintenance; Cleaning & Maintenance - Lacor 69065 Manual Del Usuario

1.- Plug toaster into a properly grounded electrical outlet of the correct voltage, size and puge
configuration (see the rating label)
2.- Place the ON/OFF switch in the
3.- Turn the speed & heat control to the lightest position while the unit warm-up.
(Note: Allow approximately 15 to 21 minutes for a warm-up period)
4.- After warm-up period, set the speed & heat control to the medium position and toast two
bread slices then re-adjust the speed & heat controls to the desired setting. (Note: To toast moist products such as English Muffins, rye bread or whole wheat, slow
conveyor speed by turning the speed control knob to a higher value (clockwise)).
5.- You can select toast grade, turning heating control to up
positions. Use up heating only for one sided toasting, such at buns and English
Muffins
POWER SAVE MODE
Selected this toaster can go into a power save mode by turning the rotary selector into Power
Save Mode
The toaster is operating at 25% power.
(Note: To place toaster back into full operation turn the selector back in to
Unit is back up to full power within 5 minutes)

CLEANING / MAINTENANCE

GENERAL
The Electric Conveyor Toaster are designed for maximum durability and performance, with mini-
mum maintenance
TO AVOID ANY INJURY, TURN THE POWER SWITCH
OFF, UNPLUG THE UNIT FORM THE POWER SOURCE
AND ALLOW TO COOL BEFOR PERFORMING ANY
MAINTENANCE.
OUTSIDE CLEANING
To preserve the bright finish of the unit, it is recommended that the exterior surfaces be wiped
daily with a damp cloth. Stubborn stains may be removed with a good stainless steel cleaner or
non-abrasive cleaner. Difficult to reach areas should be cleaned with a small brush and mil soap.

OPERATION

position.
or up/down heating
37