OPERATING INSTRUCTIONS
To operate the item, you will need one precision-
filled standard LP grill gas tank (sold separately) with
external valve threads (Figure 1).
WARNING
•
Make sure LP gas tank valve is closed.
CAUTION
•
LP gas tank must be properly disconnected and
removed prior to moving this outdoor firepit.
Inserting LP Gas Tank
1. Loosen LP gas tank retainer knob (L) by turning it
counterclockwise (Figure 2).
2. Place precision-filled LP gas tank upright into
hole in bottom frame (K) so the tank valve is
facing the gas line connection (Figure 3).
3. Secure tank by turning LP gas tank retainer knob
(L) clockwise until tight (Figure 4).
Connecting LP Gas Tank
1. Before connecting, be sure there is no debris
caught in the head of the LP gas tank, head of
the regulator valve or in the head of the burner or
burner ports.
2. Connect regulator/hose assembly (D) to tank by
turning the preassembled knob clockwise until it
stops (Figure 5).
Disconnecting LP Gas Tank
1. Before disconnecting, make sure the LP gas tank
valve is "CLOSED."
2. Disconnect regulator/hose assembly (D) from
LP gas tank by turning the preassembled knob
counterclockwise until it is loose (Figure 6).
3. Place the protective cap cover on the LP gas
tank and store the tank outdoors in a well-
ventilated area out of direct sunlight.
1
12.2 in. / 31 cm
2
3
4
12
20 lb