Troubleshooting Guide; Need Help - Good Earth Lighting SE1216-BRS-02LF4-G Manual Del Usuario

LIGHT ORIENTATION
Extreme hot or cold weather could affect the performance of the built-in sensors that detect body heat. Certain winter
clothing can shield a person's body heat from the sensor during extreme cold weather. During extreme hot weather,
the sensor may not be able to distinguish the difference between normal body temperatures and the surrounding high
temperatures. The sensor will begin working normally once weather conditions return to normal.
Care and Maintenance: Periodically clean the fixture using a mild, non-abrasive glass cleaner and soft cloth. DO NOT use solvents or cleaners containing
abrasive agents. Spray liquid cleaner onto cloth and wipe fixture clean.
Good Earth Lighting - 3 YEAR LIMITED WARRANTY:
®
The manufacturer warrants this lighting fixture to be free from defects in materials and workmanship for a period of (3) years from the date of original purchase
by the consumer. The fixture is not warrantied for use in a commercial or retail application. The warranty is limited to use in a residential environment. We will
repair or replace (at our option) the unit in the original color and style if available, or in a similar color and style if the original item has been discontinued, with-
out charge. Defective units must be properly packed and returned to the manufacturer with a letter of explanation and your original purchase receipt showing
date of purchase. Call 1-800-291-8838 to obtain a return authorization number and an address where to ship your defective product. Note: C.O.D. shipments
will NOT be accepted. The liability of the manufacturer is in any case limited to replacement of the defective light fixture product. The manufacturer will not be
liable for any other loss, damage, labor costs or injury which is caused by the product. This limitation upon the liability of the manufacturer includes any loss,
damage, labor costs or injury which is (I) to person or property or otherwise; (II) incidental or consequential in nature; (III) based upon theories of warranty,
contract, negligence, strict liability, tort, or otherwise; or (IV) directly, or indirectly related to the sale, use, or repair of the product. This warranty gives you spe-
cific rights, and you may also have other rights which vary from state to state.
FCC Statement: This device complies with Part 15 of the FCC rules. Operation is subject to the following two conditions: (1) This device may not cause harmful interference, and (2) this device must accept any interference received, including interference
that may cause undesired operation. Warning: Changes or modifications to this unit not expressly approved by the party responsible for compliance could void the user's authority to operate the equipment. Note: This equipment has been tested and
found to comply with the limits for a Class B digital device, pursuant to Part 15 of the FCC rules. These limits are designed to provide reasonable protection against harmful interference in a residential installation. This equipment generates, uses and can
radiate radio frequency energy and, if not installed and used in accordance with the instructions, may cause harmful interference to radio communications. However, there is no guarantee that the interference will not occur in a particular installation. If this
equipment does cause harmful interference to radio or television reception, which can be determined by turning the equipment off and on, the user is encouraged to try to correct the interference by one or more of the following measures: 1) Reorient or
relocate the receiving antenna. 2) Increase the separation between the equipment and receiver. 3) Connect the equipment into an outlet on a circuit different from that of the receiver. 4) Consult the dealer or an experienced radio/TV technician for help.
FCC responsible party name : Good Earth Lighting, Inc. Address: 1400 E Business Center Drive, STE 108, Mount Prospect IL 60056, USA Telephone number: 1-800-291-8838
PROBLEM
1. Security light does not come on.
2. Light continuously cycles ON and OFF
(strobe effect).
3. Light turns on during daylight hours.
4. Light comes on for no apparent reason.
5. Light stays on continuously.
REPLACEMENT PARTS LIST

Need Help?

Good Earth Lighting 1400 East Business Center Drive, Ste. 108 Mount Prospect, IL 60056
®
Good Earth Lighting is a registered trademark of Good Earth Lighting, Inc. © 2020 Good Earth Lighting, Inc.
®
The individual light
heads can be adjusted
up/down and left/
right to aim the light
heads in the direction
desired.
MOTION SENSOR
MOTION SENSOR
The light turns on when the motion sensor detects movement. Sensor detects
motion up to 40ft. The 180-degree coverage of the motion sensor is measured
side-to-side. The sensor is more effective side-to-side, rather than motion com-
ing straight at it (in-and-out). Fixed timer is 15 seconds – lights will stay on for
15 seconds after motion detection (only during night hours).

TROUBLESHOOTING GUIDE

1. ON/OFF switch is not set correctly.
2. Batteries are defective or depleted.
3 Batteries are installed wrong.
4. Battery compartment cover is loose.
5. It is daylight.
6. Movement is taking place outside of the motion
sensor detection area.
1. Light sensor is triggered by reflected light from
the security light itself.
2. Heat is being reflected from other sources and
may be triggering sensor on and off.
1. Light may be installed in shadows/dark area.
1. Sensor may be triggered by a small animal or
passing car.
2. Hot air (dryer vent, car exhaust, etc.) may be
triggering the sensor.
1. Motion sensor may be picking up a continuous flow of
warm air from an air vent, dryer vent or heat reflecting
off a surface.
Please visit our website at: www.goodearthlighting.com/support or call the Customer Care Center 1-800-291-8838,
8:30 a.m.-5 p.m., CST, Monday-Friday.
BATTERY REPLACEMENT
POSSIBLE CAUSE
Hardware Kit: ZH-SE1216F02
Low battery warning
light (red glow inside
the PIR) only stays on
for 30 minutes. Use
ONLY Alkaline batter-
ies for replacement.
Remove the mount-
ing base by turning
counterclockwise until
it comes loose.
CORRECTIVE ACTION
1. Slide switch to ON position.
2. Replace the batteries.
3. Reinstall the batteries correctly.
4. Check battery compartment cover to ensure it is
closed and secured with the screw.
5. Light is operating as it was designed. Recheck at night
or move fixture to a darker area.
6. Move fixture within the desired detection area.
1. Change the position of the light heads, aiming
light away from the reflecting surfaces.
2. Remove heat source from detection zone or
move fixture to new location.
1. Light is operating as it was designed.
1. Light is operating as it was designed.
2. Remove heat source from detection zone or
move fixture to new location.
1. Remove heat source from detection zone or move
fixture to new location.
180°
Printed in China
2