Tabla de contenido
FIXTURE CLEANING
The cleaning of internal and external optical lenses and/or mirrors must be carried out periodically to optimize light
output. Cleaning frequency depends on the environment in which the fixture operates: damp, smoky or particularly
dirty surrounding can cause greater accumulation of dirt on the unit's optics.
Make sure the area below the installation place is free from unwanted persons during servicing
Housings, fixations and installations spots( ceiling, truss, suspensions) should be totally free from any
deformation
The mains cables must be in impeccable condition and should be replaced immediately when even a small
problem is detected
In order to protect the fixture from overheat the cooling fans (if any) and ventilation openings should be
cleaned monthly.
The interior of the fixture should be cleaned annually using a vacuum cleaner or air-jet.
Clean with soft cloth using normal glass cleaning fluid.
Always dry the parts carefully.
Clean the external optics at least every 20 days. Clean the internal optics at least every 30/60 days.
ATTENTION: We strongly recommend internal cleaning to be carried out by qualified worker!
DISPLAY AND PANEL
MENU
Switch menu function
On function: page up
UP
On numerical value: increase value
On function: page down
DOWN
On numerical value: reduce value
ENTER
Settle selected function and value
7
Tabla de contenido
